with the pink spings on a 05 sti, is the car still within oem camber specs?
or do i need to get some kind of camber kit?

 

You should be able to allign it to specs. I do recommend slightly more argessive settings than OEM.

 

front camber is adjustable, rear camber is locked in. You need rear bolts to adjust that

I sugest going to Auto Inovations in Milipitas for your allignment

 

is that in illinois?

 

Don't know how applicable this info is to you, but I was only able to get -0.8 deg camber up front with '05 USDM wagon pinks. Same car with Prodrives was able to get -2.0 deg. (Prodrives were seriously low in front, thus the difference in camber. Too low for my tastes, that's why I changed to pinks.)

 

If you wanted to go with an adjustable camber plate in the front, you could get the ones from RaceComp Engineering. They just started to sell ones they started making. THey were desgined for someone in your shoes with STi pinks and stock struts. THey also lower the front a little bit to give it an additional raked stance thatn that with just your pink springs alone. Their website is www.racecompengineering.com