CreoWRX
06-13-2005, 07:31 PM
All parts are off of my 2004 STi (fitment for other models is at the buyer's discretion)...
1. Hyperflow TMIC (v2) - Used for about 5,000 miles. Comes with everything in the pictures, except for one of the elbows on the core (circled in red on one of the photos). You use your stock one in its place. There are some slight rub/scuff marks near the ends closest to the firewall, which stopped once adjusted (see photos). SOLD
Photos -
Hyperflow Top (http://www.mcnproductions.com/sale/new/hyperflow1.jpg)
Hyperflow Bottom (http://www.mcnproductions.com/sale/new/hyperflow2.jpg)
Edge 1 (http://www.mcnproductions.com/sale/new/hyperflow3.jpg)
Edge 2 (http://www.mcnproductions.com/sale/new/hyperflow4.jpg)
2. Rota Tarmac II (Charcoal Grey, 5x100, +48mm, 17x7.5") + PZero Nero M+S - Tires are 225/45/17 Pirelli PZero Nero M+S. Wheels/tires have about 3,000 miles on them. There are some scractches on each wheel from the tire shop putting on the lug nuts (see photos). SOLD
Photos -
Wheels Picture 1 (http://www.mcnproductions.com/sale/new/wheels1.jpg)
Wheels Picture 2 (http://www.mcnproductions.com/sale/new/wheels2.jpg)
Wheels Picture 3 (http://www.mcnproductions.com/sale/new/wheels3.jpg)
Tread Depth (http://www.mcnproductions.com/sale/new/tread.jpg)
Lug Area 1 (http://www.mcnproductions.com/sale/new/lug1.jpg)
Lug Area 2 (http://www.mcnproductions.com/sale/new/lug2.jpg)
3. JDM Bumper Beam + Energry Absorber - Used with my JDM fog light kit, but no longer needed with my APS fmic. Bolts in place of the factory USDM bumper beam. SOLD
JDM Bumper Beam + Energy Absorber 1 (http://www.mcnproductions.com/sale/new/jdmbeam1.jpg)
JDM Bumper Beam + Energy Absorber 2 (http://www.mcnproductions.com/sale/new/jdmbeam2.jpg)
4. K&N Typhoon - Used for around 5,000 miles. Comes with everything shown, and is ready to bolt-in. SOLD
Photo -
K&N Typhoon - STi (http://www.mcnproductions.com/sale/new/kntyphoon.jpg)
5. Blitz Nur Spec Touring cat-back - Used for around 7,000 miles. Has some slight scratches on the bottom from backing out of steep driveways, and a small dent on the top of the muffler tip from my old trailer hitch (see photos). Dent on the tip is not really noticeable once it's on the car. Comes with a new 3" gasket and Kartboy extended exhaust hangers (x2). SOLD
Photos -
Blitz Nur Spec Touring (http://www.mcnproductions.com/sale/new/blitztop.jpg)
Exhaust Tip (http://www.mcnproductions.com/sale/new/exhtip.jpg)
Muffler Bottom (http://www.mcnproductions.com/sale/new/mufflerbottom.jpg)
6. Cusco Heat Shield - Missing one bolt for the top, but could easily be found at a hardware store or just use the tmic bolt to secure. SOLD
Photo -
Cusco Heat Shield (http://www.mcnproductions.com/sale/new/cuscohs.jpg)
7. GPMoto Silencer Delete Elbow - Replaces the stock intake silencer in the passenger-side fenderwell. SOLD
Photo -
GPMoto Elbow (http://www.mcnproductions.com/sale/new/gpmelbow.jpg)
Local buyers get preference on the larger items (wheels and exhaust). Prices do not include shipping. Insurance is also extra. I will ship via UPS, and provide a tracking number as soon as payment is received/cleared. I accept Money Orders, Cashier's Checks, and Pay Pal. Pay Pal payments must add the 3% Pay Pal fee to the total.
Please PM or e-mail me for more information.
-Mike-
1. Hyperflow TMIC (v2) - Used for about 5,000 miles. Comes with everything in the pictures, except for one of the elbows on the core (circled in red on one of the photos). You use your stock one in its place. There are some slight rub/scuff marks near the ends closest to the firewall, which stopped once adjusted (see photos). SOLD
Photos -
Hyperflow Top (http://www.mcnproductions.com/sale/new/hyperflow1.jpg)
Hyperflow Bottom (http://www.mcnproductions.com/sale/new/hyperflow2.jpg)
Edge 1 (http://www.mcnproductions.com/sale/new/hyperflow3.jpg)
Edge 2 (http://www.mcnproductions.com/sale/new/hyperflow4.jpg)
2. Rota Tarmac II (Charcoal Grey, 5x100, +48mm, 17x7.5") + PZero Nero M+S - Tires are 225/45/17 Pirelli PZero Nero M+S. Wheels/tires have about 3,000 miles on them. There are some scractches on each wheel from the tire shop putting on the lug nuts (see photos). SOLD
Photos -
Wheels Picture 1 (http://www.mcnproductions.com/sale/new/wheels1.jpg)
Wheels Picture 2 (http://www.mcnproductions.com/sale/new/wheels2.jpg)
Wheels Picture 3 (http://www.mcnproductions.com/sale/new/wheels3.jpg)
Tread Depth (http://www.mcnproductions.com/sale/new/tread.jpg)
Lug Area 1 (http://www.mcnproductions.com/sale/new/lug1.jpg)
Lug Area 2 (http://www.mcnproductions.com/sale/new/lug2.jpg)
3. JDM Bumper Beam + Energry Absorber - Used with my JDM fog light kit, but no longer needed with my APS fmic. Bolts in place of the factory USDM bumper beam. SOLD
JDM Bumper Beam + Energy Absorber 1 (http://www.mcnproductions.com/sale/new/jdmbeam1.jpg)
JDM Bumper Beam + Energy Absorber 2 (http://www.mcnproductions.com/sale/new/jdmbeam2.jpg)
4. K&N Typhoon - Used for around 5,000 miles. Comes with everything shown, and is ready to bolt-in. SOLD
Photo -
K&N Typhoon - STi (http://www.mcnproductions.com/sale/new/kntyphoon.jpg)
5. Blitz Nur Spec Touring cat-back - Used for around 7,000 miles. Has some slight scratches on the bottom from backing out of steep driveways, and a small dent on the top of the muffler tip from my old trailer hitch (see photos). Dent on the tip is not really noticeable once it's on the car. Comes with a new 3" gasket and Kartboy extended exhaust hangers (x2). SOLD
Photos -
Blitz Nur Spec Touring (http://www.mcnproductions.com/sale/new/blitztop.jpg)
Exhaust Tip (http://www.mcnproductions.com/sale/new/exhtip.jpg)
Muffler Bottom (http://www.mcnproductions.com/sale/new/mufflerbottom.jpg)
6. Cusco Heat Shield - Missing one bolt for the top, but could easily be found at a hardware store or just use the tmic bolt to secure. SOLD
Photo -
Cusco Heat Shield (http://www.mcnproductions.com/sale/new/cuscohs.jpg)
7. GPMoto Silencer Delete Elbow - Replaces the stock intake silencer in the passenger-side fenderwell. SOLD
Photo -
GPMoto Elbow (http://www.mcnproductions.com/sale/new/gpmelbow.jpg)
Local buyers get preference on the larger items (wheels and exhaust). Prices do not include shipping. Insurance is also extra. I will ship via UPS, and provide a tracking number as soon as payment is received/cleared. I accept Money Orders, Cashier's Checks, and Pay Pal. Pay Pal payments must add the 3% Pay Pal fee to the total.
Please PM or e-mail me for more information.
-Mike-