SoCal: Oem rear lip and lowering springs CHEAP!!
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2002
Posts: 187
From: so cal
Car Info: 03 pearl black wrx
SoCal: Oem rear lip and lowering springs CHEAP!!
Get rid of the offroad wheel gap on your wrx asap with these springs. Lowering with 1.8 drop in the front and 1.5 drop in the rear. Evens out the wrx stance with evening out the front and rear ride height. They offer supperior comfort because thier spring rates varies with road conditions. When I had them installed ,I nor my friends noticed any difference in harshness.
Handleing was greatly improved because of the low center of gravity. I also noticed decrease nose dive and squat in breaking and acceleration.
Forsale Progress lowering spring for an 02-03 wrx. $100 picked up or + shipping and they are yours

used on my personal car for 20k. Professionally installed and removed, never been messed with, they work like new. My oem struts held up fine also.
Heres how it dropped my blk wrx.

Also forsale is a Oem Subaru Silver PSM Australian EGR rear lip. This is made of high oem quality standards. It was purches 5month ago off a fellow board member and I need money for college so ithas to go. It was never installed onmy car, it was stored in my room. The paint is in great condition with high quality clearcoat from the factory. It shines nice and matches perfect since its oem subaru.
The previous owner had a very slow encounter with a pole and the lip has a minor bump that isnt noticable unless one points it out. I saw the lip on his car and couldnt notice the problem. The paint isnt scuffed or scratch in anyway. All it is, is the plastic is about 1 inch lenght of plastic is pushed upwards on the upper portion. Its no big deal, A heat gun could reshape and even out the little bump, not a problem. Save big bucks
here are the pics



If you want morepics on the lip just email me scoobyrex247@yahoo.com
I can even reccomend you to a family shop to install the lip or to paint it any color you wish. Lip comes with all oem mounting hardware.
If you buy both ill lower the price to $150 picked up.
For all ofthose who wanna ship. It is $100 for either spring or lip, plus shipping. I will take care of the 3 percent paypal.
Thank you, located in 626 area.
Handleing was greatly improved because of the low center of gravity. I also noticed decrease nose dive and squat in breaking and acceleration.
Forsale Progress lowering spring for an 02-03 wrx. $100 picked up or + shipping and they are yours

used on my personal car for 20k. Professionally installed and removed, never been messed with, they work like new. My oem struts held up fine also.
Heres how it dropped my blk wrx.

Also forsale is a Oem Subaru Silver PSM Australian EGR rear lip. This is made of high oem quality standards. It was purches 5month ago off a fellow board member and I need money for college so ithas to go. It was never installed onmy car, it was stored in my room. The paint is in great condition with high quality clearcoat from the factory. It shines nice and matches perfect since its oem subaru.
The previous owner had a very slow encounter with a pole and the lip has a minor bump that isnt noticable unless one points it out. I saw the lip on his car and couldnt notice the problem. The paint isnt scuffed or scratch in anyway. All it is, is the plastic is about 1 inch lenght of plastic is pushed upwards on the upper portion. Its no big deal, A heat gun could reshape and even out the little bump, not a problem. Save big bucks

here are the pics



If you want morepics on the lip just email me scoobyrex247@yahoo.com
I can even reccomend you to a family shop to install the lip or to paint it any color you wish. Lip comes with all oem mounting hardware.
If you buy both ill lower the price to $150 picked up.
For all ofthose who wanna ship. It is $100 for either spring or lip, plus shipping. I will take care of the 3 percent paypal.
Thank you, located in 626 area.
Thread
Thread Starter
Forum
Replies
Last Post
kwiksilverwrx
NorCal Classifieds
38
Jul 22, 2013 01:04 PM
1WRX2NV
NorCal Classifieds
0
Sep 2, 2009 08:09 PM
Racecomp Engineering
Suspension, Handling, and Brakes
3
May 22, 2008 08:54 AM



